In SMT placement machine industry, if you want to achieve rapid and accurate SMT production, you need SMT solution, universal SMT machine manufactory would explain for everybody now SMT placement machine is what form a complete set of equipment.
I. Solder paste mixer
Solder paste is a substance that needs to be applied to the PCB before mounting the task, it can have the effect of fixed in the next task, while relative we manually solder paste mixer mixing with faster, better results, both in speed and uniformity in the mixing are relatively good, so to promote the progress of the whole production line.
It is necessary to evenly smear the mixed solder paste on PCB board, solder paste either too much or too little can influence our output effect, so we can use solder paster printer printing on the PCB. First of all, we fixed the PCB by using the screen printing machine, and then the scraper of the screen printing machine can spread the solder paste evenly.
III. Reflow oven
After SMT placement machine is our common reflow oven machine, its main task is, will we sent by the SMT placement machine plate heat to melt the solder paste on the surface, can make my components and PCB welding together tightly, so as to achieve the requirements of the production we need, but also can prevent the phenomenon of PCB and components deformation.
IV. AOI machine
General SMT AOI is located at the end of the entire production line, mainly including online AOI machine and offline AOI machine. According to different requirements and operation modes, we need to choose different AOI machine for testing, so that we can know where the problems of the assembled finished products are. Such as SMT placement machine for leakage, stick is crooked or throw a wait for a phenomenon, can be used to reset and timely maintenance.