NeoDen N10P Surface Mount Machine
■ Placement Rate up to 20,000CPH
■ Placement Accuracy 0.01 mm
■ Feeder Capacity of 80 pcs 8mm tape feeders
The NeoDen N10P is a high-performance High Speed Pick and Place Machine, designed to boost your SMT production speed and yield with its powerful configuration and high-level automation.
Intelligent Vision: Features a comprehensive Camera Configuration of Dual Mark Camera + Front Flying Camera + IC Camera. It supports a wide Component Range, from 0201 up to 40mm×40mm (Max Height 16mm).
High Automation & Compatibility: Features the standard Automatic Nozzle Change function with 39 nozzle positions for increased speed and flexibility.
Send Inquiry
Product Details ofNeoDen N10P Surface Mount Machine
Introduction of NeoDen n10P pick and place machine
NeoDen N10P is a high-performance, easy-to-use and stable pick and place machine based on the original NeoDen10. The placement head is equipped with 8 independent nozzles, which can achieve high-speed placement with simultaneous pick up,as well as the maximum placement speed can reach 20,000CPH. It is equipped with a 39-hole fully automatic nozzle replacement device. Meanwhile, it can install a large feeder capacity of up to 80 tape feeders. It adopts imported servo drive with grinding screw configuration to greatly ensure the placement stability and repeated placement accuracy.
It is a cost-effective placement machine that you can rely on.
Why Choose NeoDen N10P surface mount pick and place machine?
【Leap in Efficiency】8 mounting heads and full closed-loop control system, maximum speed up to 20,000CPH.
【Superior Accuracy】 Placement accuracy up to ±0.01mm, equipped with Dual Mark Camera, Front Flying Camera and IC Camera, especially the IC Camera supports auto calibration to ensure accurate placement of tiny components.
【Superior Compatibility】Supports PCB size up to 1500mm x 450mm, with extended conveyor belts to cope with ultra-long boards. Wide range of components, flying camera supports 0201-22mmx22mm, IC camera supports 0201-40mmx40mm, maximum height of components up to 16mm.
【Flexible Feeding】80 belt feeder capacity, support for mixed use of electric and pneumatic feeders, and tray and tube feeder support to meet diversified production needs.
【Intelligent Automation】Automatic nozzle change function (39 nozzle positions) and automatic nozzle height calibration significantly reduce manual intervention and improve productivity and flexibility.
【Stable and Reliable】Nozzle air pressure monitoring and abnormal air pressure suspension to ensure stable operation and avoid material waste. Optimized software design improves ease of use and stability.
【Easy Maintenance】Add a throw box to facilitate material recycling.
NeoDen N10P Pick and Place Machine Video
Specification
| Number of Head | 8 | Speed | 20,000CPH (Max) |
| Position Accuracy | ±0.01mm | Camera Configuration | Dual Mark Camera+Front Flying Camera+IC Camera |
| Component Range | Flying Camera: 0201- 22 x 22 mm | PCB Size | Min.: 50 x 50 mm |
| IC Camera: 0201- 40 x40 mm | Max.: without IC tray: 450 * 1500 mm | ||
| Max Height: 16 mm | Max.: with IC tray: 395 * 1500 mm | ||
| PCB Thickness | 0.2 - 3.5 mm | Feeder Capacity | Tape&Reel: 80 pcs ( 33 front + 47 rear ) |
| Automatic Nozzle Change | Yes | IC Tray: 1 | |
| Support Pins to Hold PCB | Optional | Power | 600W, Single phase, 220V/110V, 50Hz/60Hz |
| Air Source | 0.6Mpa-0.8Mpa | Flow rate | 37 L / min |
| XY Drive Type | WON Linear Guide/THK Grinding Screw C5-2040 | XY Drive Motor | Panasonic A6 750W Servo Motor |
| XY Motion Feedback Control | SPM/IBG Magnetic Linear Encoder | Weight | 1,000 kgs |
| Dimension | 1289 x 1254 x 1386 mm | Packing Size | 1320 x 1290 x 1456 mm |
Details of NeoDen N10p SMT machine
8 Placement Heads
8 heads with fully closed-loop control system support to pick up components simultaneously with maximum speed 20,000CPH.
Tape Reel Feeders
Support 80 tape feeders, 20 stick feeders and 60 tray feeders
Allows mixed use of electric and pneumatic feeders in the same feeder base.
Self-developed Flying Camera
Front and rear with 2 fourth generation high speed flying camera recognition systems, US ON sensors, 28mm industrial lens.
Nozzle Station
Automatic nozzle change function with 39-hole tremendously increase placement speed and flexibility, reduce labor work.
Auto Nozzle Height Calibration
Automatic calibration of nozzle height,
manpower can be utilized efficiently.
Air Pressure Auto Inspection
Abnormal air pressure triggers placement pause to prevent potential damage and waste of materials.
You are welcome to enquire for the further details and solutions.
customer case of NeoDen N10P
About NeoDen SMT
factory
NeoDen Profile
- Established in 2010, 200 + employees, 27000+ Sq.m. factory.
- NeoDen Products: Different Series PnP machines, NeoDen YY1, NeoDen4, NeoDen5, NeoDen K1830, NeoDen9, NeoDen N10P, Reflow Oven IN Series, as well as complete SMT Line includes all necessary SMT equipment.
- Successful 20000+ customers across the globe.
- 40+ Global Agents covered in Asia, Europe, America, Oceania and Africa.
- R&D Center: 3 R&D departments with 25+ professional R&D engineers.
- Listed with CE and got 70+ patents.
- 30+ quality control and technical support engineers, 15+ senior international sales, for timely customer responding within 8 hours, and professional solutions providing within 24 hours.
certification
exhibition
Other Production Line for Your Choice
If you need, please don't be hesitate to send your inquiry.
FAQ of neoDen N10P PnP machine
Q1. What PCB Size Range Does the NeoDen N10P Support?
- Minimum: 50 x 50 mm
- Maximum:
Without IC tray holder: 450 x 1500 mm
With 1 IC tray holder: 395 x 1500 mm
Q2. Do you provide software updates for NeoDen N10P?
Yes, all customers who purchase our equipment are entitled to free software updates.
Q3. What's your warranty policy?
- Pre-Shipment Inspection
Every machine undergoes rigorous testing before shipment. The buyer should inspect the package upon receipt.
- Warranty Coverage
24-month full warranty from delivery date
Lifetime repair service
- Technical Support
Online Q&A and troubleshooting assistance
One-to-one after-sales service
Complimentary technical consultation
Q4. Does the NeoDen N10P LED SMT machine have CE?
Yes, the NeoDen N10P has been awarded the CE certificate by TÜV NORD.
Hot Tags: NeoDen N10P Surface Mount Machine, China, manufacturers, suppliers, wholesale
Previous
SMT Chip Mounting MachineSend Inquiry
