In the process of using the SMT machine, we will inevitably encounter a lot of failures. Some of the malfunctions are caused by our improper use and maintenance of the laminator. Therefore, if we want to use the patch machine for a long time, we must seriously maintain the pick and place machine.
Here are five maintenance methods to help you properly maintain the machine:
1. Clean and remove the dust and dirt on the surface of the mounting machine and the circuit board. The purpose of maintenance is to prevent dust and dirt from dissipating heat inside the machine, which can cause electrical components to overheat and burn.
2. Clean and lubricate the moving parts of the mount machine. Due to improper environmental control, a large amount of dust adheres to the moving parts for a long time. The purpose of maintenance is to prevent the mount machine from timely and professional maintenance and cleaning of the moving parts of the machine. Long-term overload operation of the machine will certainly affect the service life of the machine;
3. After long-term operation, the relevant parts are easy to wear, deformation and aging, and the running-in deviation between the parts is small. The original parameters of the machine tool have been adapted to the state of the machine tool, which affects the positioning accuracy of the machine tool. Therefore, the purpose of maintenance is to calibrate the machine regularly so that the machine can be produced with high precision and improve product quality.
4. Remove and clean the internal air path, solenoid valve, vacuum generator and cylinder of the mounting machine; The purpose of maintenance is to avoid grease dirt in the oil line. If not timely cleaning and maintenance, the gas path will be blocked. Not smooth, resulting in high casting; In serious cases, the oil accumulated in the gas path will corrode the internal seals, solenoid valves, vacuum generators, cylinders and other components, resulting in component damage, which seriously affects the normal use of the machine;
5. If the installation of the SMT machine out of warranty, long time operation, the machine to carry out comprehensive professional maintenance? Certain parts of the machine are already in trouble. The purpose of this maintenance is to avoid hidden dangers that cannot be resolved in time, which will inevitably threaten the normal production of the machine in the future. Therefore, it is necessary to carry out major maintenance, timely inspection and discovery of hidden dangers in the SMT and to solve, in order to reduce the frequency of machine failure, improve production efficiency.