Many people use the SMT machine for the first time, because they are not familiar with its operation method and machine system, and sometimes the production speed is very slow, so we must pay attention to the method of production, so what can we do to improve the efficiency of the SMT machine? Next, I will answer your questions:
1. Engineers pay more attention to equipment management, including making equipment maintenance plan, training maintenance personnel, and implementing daily, weekly, monthly and annual maintenance.
2. Feeder problems lead to material throwing, poor placement, feeder maintenance and calibration. Hire a calibration instrument to calibrate the feeder.
3. Arrange mounting machine equipment suppliers for retraining or external training in the company to improve the ability of engineering and technical personnel to reduce faults and improve processing speed.
4. Strictly carry out manual cleaning at least once every 2 hours to reduce poor printing quality and cause poor shutdown when it is too high, so pay attention to monitoring once an hour;
5. Line body balance ratio must be above 90, and equipped with high speed, medium speed motor efficiency. General-purpose machines can be more efficient than front-end machines so that the board can be cleaned in the event of an anomaly.
6. Strictly implement equipment maintenance plan, make maintenance feasible, carry out seasonal maintenance and rectification, etc. Reduce equipment failure and shutdown due to poor maintenance, and do trial run and self-check work.
7. When defining the capacity target, the mounter programmer must define the actual operation with a stopwatch to measure the actual operation. This way the problem can be solved in time, and once a product is finished, reality and theory don't agree.