NeoDen T-90 SMT Translational Machine

Introduction

NeoDen T-90 SMT Translational Machine is specifically designed for high-efficiency SMT production lines. As a heavy-duty, compact automated control unit, it is primarily used at the turning points of SMT lines to switch the flow direction by precisely altering the PCB's conveying path. This significantly optimizes floor space utilization in electronics manufacturing facilities without compromising production capacity or precision.

Fully compliant with SMEMA standards, this equipment features an advanced Mitsubishi PLC control system and a high-resolution touchscreen operator panel. It supports diverse multi-angle routing configurations, making it an indispensable precision link in modern SMT automated production line integration.

Core Performance Advantages

• Flexible Multi-Angle Routing: The system supports T-shaped configurations, offering multiple PCB flow switching modes including 90°, 180°, 270°, straight-through, and clockwise/counterclockwise rotation, perfectly adapting to various complex L-shaped, U-shaped, or T-shaped production line layouts.
• Industrial-Grade Control Architecture: Driven by a stable Mitsubishi PLC control system and paired with an intuitive touchscreen control panel, it enables line-wide coordination, real-time monitoring, multi-level speed adjustment (including no-board speed, automatic speed, and conveyor belt speed), and precise delay time settings.
• Fully Enclosed, High-Safety Hardware: Features a robust, fully enclosed cabinet design that physically isolates potential hazards such as the internal drive system, providing comprehensive equipment protection and ensuring the safety of on-site operators.
• Standard SMEMA Smart Line Integration: Both the front (infeed) and rear (outfeed) ends of the equipment are equipped with standard SMEMA signal interfaces, natively compatible with 2-wire/4-wire signal cables, and support signal handshaking with various upstream and downstream devices, whether voltage-based (24V DC) or voltage-free (dry contact).

Specification

              

Purpose	Used in SMT production lines to change the direction of the PCB at corners to achieve flow direction switching	Guide Rail Height from Ground	900 ± 30 mm
Control System	Mitsubishi PLC Control / Touchscreen HMI Control Panel	Translation Distance	80 mm
Direction Routing Modes	90° / 180° / 270° / Straight-through / Rotation (Clockwise / Counterclockwise)	Maximum Turning Diameter	φ 650 mm
Maximum PCB Dimensions	L460 mm × 330 mm	Conveyor Belt Specifications	4 mm
Guide Rail Width Adjustment Range	50 mm to 330 mm	PCB Conveyor Speed	9 meters/minute (9 m/min)
Guide Rail Length	560 mm	Power Requirements	220V AC 50Hz / 2A (110V voltage configuration available upon request)
Air Supply/Compressed Air Requirements	4–6 kg/cm² (corresponding to equipment initialization pressure of 0.4–0.6 MPa)	Dimensions	L700 mm × W700 mm × H1100 mm
Gross Weight	153 kg	Wooden Crate Dimensions	860 mm × 860 mm × 1350 mm

 

Standard Preventive Maintenance Procedures

To ensure the angle aligner track maintains a high level of alignment accuracy over the long term and to maximize the service life of equipment components, factory operators should strictly follow the following low-cost, high-efficiency periodic maintenance procedures:

• Daily Maintenance: At the end of each workday, wipe down and clean the equipment, thoroughly removing residue, debris, and daily dust from the surfaces of the guide rails, carriages, and sensors.
• Monthly Maintenance: Conduct a monthly inspection of the mechanical transmission structure and apply an appropriate amount of industrial grease to critical friction points such as the machine's lead screws and rotating bearings.
• Quarterly Maintenance: Conduct a comprehensive inspection of all mechanical fastening screws on the machine chassis every quarter to check for looseness and retighten them as necessary.

 

NeoDen: A reliable SMT equipment manufacturer

 

factory

 

Company Profile

Zhejiang NeoDen Technology Co., Ltd. has been manufacturing and exporting various small pick and place machines since 2010. Taking advantage of our own rich experienced R&D, well trained production, NeoDen wins great reputation from the world wide customers.

In our global Ecosystem, we collaborate with our best partners to deliver a more closing sales service, high professional and efficient technical support.

We believe that great people and partners make NeoDen a great company and that our commitment to Innovation, Diversity and Sustainability ensures that SMT automation is accessible to every hobbyist everywhere.

 

 

certification

 

 

 

exhibition

 

 

FAQ

Q1. What is the maximum PCB size supported by the NeoDen T-90 SMT Translational Machine? What is the width adjustment range?

A. The maximum PCB size supported by the machine's native design is 460 mm × 330 mm.

To accommodate products from different production batches, the width of the conveyor rails is highly adjustable, supporting manual stepless adjustment from 50 mm to 330 mm.

 

Q2. Can this rotary conveyor rotate in both directions? What rotation directions does it support?

A. Yes. Thanks to the built-in Mitsubishi PLC control system, the turntable's carriage supports both clockwise and counterclockwise rotation.

The HMI features preset routing modes such as 90°, 180°, 270°, and straight-through, fully meeting the design requirements of various T-shaped or staggered production lines.

 

Q3. What are the specific requirements for the on-site environment, power supply, and air supply during equipment installation?

A. To ensure stable operation of the equipment, the workshop environment must meet the following requirements: temperature between 5°C and 55°C, humidity below 85% RH (non-condensing), and an environment free of vibration and corrosive gases. Regarding infrastructure, the equipment's standard power supply is 220V AC (50Hz/2A) or 110V AC, as configured on-site, and must be securely grounded. Additionally, an external air compressor or central air source is required to provide a steady supply of clean compressed air at a pressure of 4–6 kg/cm² (i.e., 0.4–0.6 MPa).

Hot Tags: neoden t-90 smt translational machine, China, manufacturers, suppliers, wholesale