Pick and Place SMT Mounter for Fast Prototype

About Pick and Place SMT Mounter for Fast Prototype

1. Support 0201, LED, BGA,0.5mm pitch QFP, SMT Connectors, and many others,  electronic feeder

2. Support cut tape, tube and tray components

3. TUV NORD CE approved

Pick and place SMT mounter technical parameters

Number of Heads with Vision enabled: 4

Placement Rate: 10000PCS/H (vision off), 5000PCS/H (vision on)

Feeder Capacity: Tape Reel Feeders: 48  

Tape width: 8mm, 12mm, 16mm, 24mm                                                                                                             

Vibration Feeders: 5                                                                                                                                           

IC Tray Capacity: 45 

Applicable Components: 0201, BGA, SOIC, SSOP, QFN, TQFP, LED Component, Diode, Triode, Tack Switch           

Component Height Maximum: 5mm

Resolution X/Y axis: 0.01mm, Z axis: 0.1mm

Rotation: +/-180(360)

Positioning Accuracy: +/-0.02mm

X-Y repeatability: +/-0.02mm

Applicable PCB area: 310mm*1500mm

Placement Area: 310*1500mm(without waffle Tray), 140*1500mm (With 1 waffle Tray)

Programming: SOFTWARE AUTOMATIC PROGRAMMING/MANUAL MECHANICAL PROGRAMMING

Main Control: GUI

Power Supply: 220V, 50Hz (convertible to 110V)

Power: 180W

External Dimensions: Machine:87*68*48CM

Packing size: 94*74*60CM

What is the SMT production line?

Also Called SMT assembly line

SMT is the new technology to produce the circuit. Many years ago, People produce circuit use wires, so electronic product is big and hard to use and take with. So the circuit develops direction becomes smaller, then People invented the PCB, it can put the circuit on a small PCB, and then the components invented to out the resistors, capacitors on the PCB. All technology rated in this process is SMT.

Traditional electronic components compressed into a volume of only a few tenths of the device directly to the surface assembly components paste, printed on the printed circuit board surface location of the assembly technology.

Compared with the traditional process, SMT has high density, high reliability, low cost, miniaturization, sound field automation, and other five characteristics.

About Us

Zhejiang Neoden Technology is a professional supplier with 10 years of experience and provides one-stop SMT solutions for customers, key products are pick&place machines, reflow oven, and solder printer. Currently, we have sold 10000+ sets of machines and exported to 130+ countries in the world, and have built a good reputation in the market.

Hot Tags: pick and place smt mounter for fast prototype, China, manufacturers, suppliers, wholesale