Wave soldering machine for a long time, adhesion of solidified rosin oil, flux and other organic chemical or inorganic pollutants, in order to better avoid the secondary pollution of PCB and ensure the smooth implementation of the process, must be carried out in a timely manner on the machine and equipment accessories to carry out maintenance and cleaning. Usually based on the specific circumstances of manufacturing, regular implementation to carry out, such as daily, weekly, monthly, quarterly, etc., the relevant content for reference.
I. Wave soldering daily maintenance of the main content
1. Remove the residue in the tin pool, with a tin spoon will be all tin surface slag collection together, and add the reduction powder to restore the slag within the part of the broken tin. end of the above process, the tin furnace to return to the position.
2. with a rag dipped in glass water will protect the glass inside and outside the scrub clean.
3. with a hand brush dipped in detergent will be chain claws on the dirty brush clean, with a bamboo stick will be hidden in the chain claws and the black piece of dirt between the removal of clean.
4. The spray extraction hood filter removed with a clean detergent clean.
II. Wave soldering weekly maintenance of the main content
1. Clear the tin furnace wave parts.
2. with clean rags into the end, PCB inductor wipe clean.
3. Erase the two waves of tin pump bearing dirty lubricant, with oil gun will be new oil through the oil spray pressure into the bearing.
4. remove the rosin oil area, heating area of the extraction hose, the internal structure of the rosin oil and other dirty cleaning.
5. remove the body shell, base, furnace walls, rosin oil cylinder and wash claws.
III. Wave soldering monthly maintenance of the main content
1. Clear rosin oil nozzle slide, position distance sensor, and give the slide coated with new lubricant.
2. Remove the control cabinet on the cooling fan, will be cleaned and air-dried isolation grille and then again on.
3. Add new lubricant to the transmission chain; clean the transmission chain rotation motor as well as the mesh cover.
4. Remove the rosin oil nozzle, test the internal structure of the sealing rubber ring is damaged.
5. the whole two hair wave machine up and down, clean the lower end of the tin pump tin slag and other dirt, dirty lubricant bearings, clean motor mesh cover, with an oil gun will be new oil through the nozzle pressed into the bearings.
IV. Wave soldering quarterly maintenance main content
1. the overall drive chain or chain claw removed, cleaned with detergent soak, after reloading and add lubricant; disassembly process is as follows: remove the commonly used connecting chain on the drive chain, the inlet end of the tensioning gear parts removed, the drive chain as a whole from the outgoing end of the drag out.
2. Reassemble after cleaning.
Quick facts about NeoDen
1. Established in 2010, 200+ employees, 8000+ Sq.m. factory.
2. NeoDen products: Smart series PNP machine, NeoDen K1830, NeoDen4, NeoDen3V, NeoDen7, NeoDen6, TM220A, TM240A, TM245P, reflow oven IN6, IN12, Solder paste printer FP2636, PM3040.
3. Successful 10000+ customers across the globe.
4. 30+ Global Agents covered in Asia, Europe, America, Oceania and Africa.
5. R&D Center: 3 R&D departments with 25+ professional R&D engineers.
6. Listed with CE and got 50+ patents.
7. 30+ quality control and technical support engineers, 15+ senior international sales, timely customer responding within 8 hours, professional solutions providing within 24 hours.