+86-571-85858685

How To Choose SMT Pick And Place Machine?(II)

Apr 08, 2021

SMT Production Line

When we choose SMT mount machine, we can choose from the following aspects:

Visual system

Pick and place machine vision system is the first factor that significantly affects the installation of components. SMT machine needs to know the exact position of the circuit board and determine the relative position of components and boards to ensure the accuracy of automatic assembly.

The imaging is done using a video system. Visual systems are generally classified as top view, up view, head or laser alignment, depending on the position or type of camera. Among the three ways of device alignment (CCD, line-sensor, laser), CCD technology is the best, and the current CCD hardware performance is of a fairly high level. In terms of CCD hardware development, "backlighting" and "front-lighting" technologies, as well as programmable Lighting controls, have been developed earlier to better cope with different component mounting needs.

Feeder

Boom type smt machine support many different types of feeders, such as belt type, disk type, bulk type, tube type, etc. Generally, manufacturers should consider the generality of feeders on their machines, but sometimes manufacturers may design feeders for a particular machine, which limits their use on other machines. Dedicated machines not only cause a large number of feeders to sit idle, but also require space to store them. 

Flexibility

Due to the increasingly fierce competition in the current electronic products, the production of uncertainty increased, often need to adjust the output of products or arrange product transformation, so SMT placement machine has put forward the corresponding requirements, requiring has good flexibility, so as to adapt to the ever-changing manufacturing environment, this is what we often say that the flexible manufacturing system (FMS). Machine flexibility is a key consideration when choosing equipment.

 

Make a decision

Automated equipment is the basis for electronic assembly. The selection of equipment must be based on the following key considerations: machine type, imaging, feeding, and flexibility. With this knowledge, the advantages and disadvantages of different equipment can be identified and an informed choice can be made. At the same time, the choice of equipment should be combined with your own needs, must not blindly seek for bigger and more comprehensive, so as not to cause unnecessary waste.


Neoden4 pick and place machine

NeoDen SMT machine


NeoDen provides a full SMT assembly line solutions, including SMT reflow oven, wave soldering machine, pick and place machine, solder paste printer, PCB loader, PCB unloader, chip mounter, SMT AOI machine, SMT SPI machine, SMT X-Ray machine, SMT assembly line equipment, PCB production Equipment SMT spare parts, etc any kind SMT machines you may need, please contact us for more information:


Zhejiang NeoDen Technology Co., Ltd

Email: info@neodentech.com

Send Inquiry