Electronics manufacturers how to choose suitable for their own SMT pick and place machine, which brand to use, which brand of high efficiency, the quality of the finished product is good.
Now NeoDen gives a few suggestions, which I hope will be helpful to you.
SMT mount machine can be roughly divided into four types: Arm type SMT machine, compound type SMT machine, rotary type surface mount machine and large parallel system. Different kinds of SMT machine have their advantages and disadvantages, usually depends on the application or process requirements of the system, there is a certain balance between its speed and accuracy.
Automatic SMT machine function and characteristics
(1) Visual recognition technology application: Visual recognition software technology adopts non-stop fast shooting and positioning technology to realize optical image capture and positioning and flight alignment; Each nozzle will take pictures through the camera feedback suction and feeding situation to reduce the probability of wrong paste and less paste.
(2) Professional design for FPC soft light strip bottom plate, can be effectively pasted FPC soft light board, hard light board, aluminum substrate and other products, 1200mm light strip dedicated track. The 1200 lamp strip does not need to move the PCB board to avoid the displacement or element deviation caused by the attached part of the component.
(3) The feeding spindle specially designed for LED mounting can automatically adjust the feeding pressure to ensure that the LED sphere will not be broken due to too much pressure.
Core technology of NeoDen automatic SMT machine:
1. Machine runs on highly stable and secure Linux operating system.
2. Double mark cameras to reach at extreme end feeders for better calibration.
3. High resolution and high speed component camera system improves the overall speed of the machine.
4. Ethernet communication interface for all internal signal travel makes the machine to perform more stable and flexible.
5. Closed loop Servo control system with feedback makes the machine to function more accurate.
6. Picking location of pneumatic feeder can be calibrated automatically and promptly, to ensure easy operation and high efficiency.
7. PCB location can be calibrated automatically and promptly, based on the correct and specific placement request.
NeoDen K1830 Pick and place machine
NeoDen provides a full SMT assembly line solutions, including SMT reflow oven, wave soldering machine, pick and place machine, solder paste printer, PCB loader, PCB unloader, chip mounter, SMT AOI machine, SMT SPI machine, SMT X-Ray machine, SMT assembly line equipment, PCB production Equipment SMT spare parts, etc any kind SMT machines you may need, please contact us for more information:
Zhejiang NeoDen Technology Co., Ltd
Email: info@neodentech.com