Here is some echnical parameters of automatic solder printer.
PCB parameter | |
Maximum board size（X x Y） | 450mm x 350mm |
Minimum board size（X x Y） | 50mm x 50mm |
PCB thickness | 0.4mm~6mm |
Warpage | ≤1%Diagonal |
Maximum board weight | 3Kg |
Board margin gap | Configuration to 3mm |
Maximum bottom gap | 20mm |
Transfer speed | 1500mm/s(Max) |
Transfer height from the ground | 900±40mm |
Transfer orbit direction | L-R,R-L,L-L,R-R |
Transfer mode | One stage orbit |
PCB clamping method | Programmable elastic side clamp + Automatic adjustment plate thickness + Mdge locking of base plate pressing (Option: 1. Bottom integral cavity type vacuum; 2.Bottom multi-point local vacuum) |
Support method | Magnetic thimble + Equal high block. (Optional: 1.vacuum suction cavity; 2.special workpiece fixture) |
Printing parameters | |
Printing head | Floating intelligent printing head (two independent direct connected motors) |
Template frame size | 470mm x 370mm~737 mm x 737 mm |
Maximum printing area（X x Y） | 450mm x 350mm |
Squeegee type | Steel/Glue Squeegee（Angel 45°/50°/60° matching the printing process） |
Squeegee length | 300mm (optional with length of 200mm-500mm) |
Squeegee height | 65±1mm |
Squeegee thickness | 0.25mm Diamond-like carbon coating |
Printing mode | Single or double Squeegee printing |
Demoulding length | 0.02 mm - 12 mm |
Printing speed | 0 ~ 200 mm/s |
Printing pressure | 0.5kg - 10Kg |
Printing stroke | ±200 mm (From the center) |
Cleaning parameters | |
Cleaning mode | 1. Drip cleaning system; 2. Dry, wet and vacuum modes |
Length of cleaning and wiping plate | 380mm (optional with 300mm, 450mm, 500mm) |
Image parameters | |
Field of view | 8mm x 6mm |
Platform adjustment range | X:±5.0mm,Y:±7.0mm,θ:±2.0° |
Benchmark point type | Standard shape benchmark point（SMEMA standard），solder pad/openings |
Camera system | Independent camera，upwards/downwards imaging vision system，geometric matching location |
Performance parameters | |
Repeat position accuracy | ±10.0μm @6 σ，Cpk ≥ 2.0 |
Repetition accuracy | ±20.0μm @6 σ，Cpk ≥ 2.0 |
Cycle time | ＜7s (Exclude printing and cleaning) |
Product changeover | ＜5min |
Equipment | |
Power requirements | AC220V±10%,50/60HZ,15A |
Compressed air requirements | 4~6Kg/cm² |
Operating system | Win7 |
External dimension | 1152mm(L) x 1415mm(W) x 1540mm(H) (Without light,monitor and keyboard) |
Machine weight | Appro.1000Kg |