Reflow Oven DIY

Parameters for reflow oven

Supply Voltage: AC220V/ 50Hz,AC110V/60Hz     

Putout Power:  1500W

Maximum Soldering Area:  300×320 mm

Temperature Range: 0℃-280℃

Cycle Time: 1～8 min

G.W: 15kg 

Packing size: 51x45x33cm

Especially a good choice for customers who prefer in prototype project as a startup device.

And we can supply a one-stop small production line to help you save costs.

Standard Procedure of Assembly a Board

Step 1. Solder Printer 

Place a small dab of solder paste on each pad where a component will sit. To make this process faster, a stencil is laid over the board, and the paste is smeared over the stencil with a metal squeegee.
 

Step 2. Pick and Place Machine

Once the board has paste applied, we need to place the components on top(This can be done by hand or by a machine.). A pick and place (PNP) machine uses a vacuum to lift a component off of a piece of tape, rotate it to the right orientation, then place it on a circuit board that has been coated with solder paste. It takes a few hours to set up a machine to build the assembly, but once everything is running, it is very fast.
 

Step 3. Reflow Oven

After pick-and-place, the paste must be reflowed to create a solid solder joint. The boards are put on a conveyor belt that moves slowly through a large oven, exposing the boards to enough heat to melt the solder (about 250°C!). As the board moves through the oven, it encounters different temperature zones, allowing it to warm up and cool down at a controlled rate.

If you prefer to smt oven with conveyor belt, the model NeoDen IN6 will be a good choice: small size with touch screen, also with the temperature test graph function in the software system, further details could check: https://www.neodensmt.com/reflow-oven/desktop-reflow-oven.html

NeoDen is a reliable manufacturer with 10 years' experience. Until now, we have exported to more than 130 countries and 10000+ sets of machines all over the world, and have built a good reputation in the market. We are in a good position not only supply you high-quality machines, but also excellent after-sale service. The well-trained engineer will provide any technical support to you.

Zhejiang NeoDen Technology Co., Ltd

Web: www.neodentech.com

Email: info@neodentech.com

Hot Tags: reflow oven diy, China, manufacturers, suppliers, wholesale