Here is the trouble shooting for SMT solder paster mixer.
troubles | cause | Process mode |
Turn on the power switch, the power indicator is not displayed. | We confirm that the power input is correct. Bad tube | Check power Replace |
Indicator light does not work. | Bad indicator light. | Replace |
The disk is running, but the paste pot does not rotate. | The second turn belt is broken or loose. | Replace and tighten |
Unable to set time | Time relay is broken. | Replace |
The indicator is normal, but the paste pot does not rotate. | The single turn belt is broken or loose. The motor is broken. | Replace,and tighten |
Machine running jitter, and has abnormal sound. | Please confirm the weight on both side of the solder paste is balance. Machine transmission parts loose. The paste pot is loose. The solder paste and the clamp gap is too large. | Weight balancing Tighten Tighten Using suitable paste pot |
After maintenance, machine running has abnormal sound. | The belt and belt cover is in abnormal installation. | Normal installation. |
If you need, please feel free to contact us for more information.
NeoDen provides a full SMT assembly line solutions, including SMT reflow oven, wave soldering machine, pick and place machine, solder paste printer, PCB loader, PCB unloader, chip mounter, SMT AOI machine, SMT SPI machine, SMT X-Ray machine, SMT assembly line equipment, PCB production Equipment SMT spare parts, etc any kind SMT machines you may need, please contact us for more information:
Hangzhou NeoDen Technology Co., Ltd
Web: www.neodensmt.com
Email: info@neodentech.com