Introduction
As electronic components become smaller and more integrated, traditional SMT AOI equipment is no longer sufficient to meet the inspection requirements of high-density PCB assemblies. X-ray inspection equipment, with its penetrating imaging capabilities, plays an irreplaceable role in solder joint quality inspection, particularly in the detection of hidden solder joints such as BGA and QFN packages.
To avoid the situation of "buying the wrong equipment or using it improperly," this article will provide a detailed overview of the 6 key parameters that must be understood before purchasing X-ray inspection equipment, helping newcomers quickly get started and make rational decisions.
I. X-ray Source
1. Type: Open vs. Closed
The X-ray source is the core of the entire inspection system, determining image quality and service life.
Closed X-ray tube: Simple structure, low cost, but short service life, suitable for low-frequency inspection scenarios.
Open X-ray tube: Replaceable filament, long service life, suitable for high-frequency, long-term production environments, especially for SMT production lines.
2. Voltage & Power
X-ray penetration power is closely related to voltage. Common types include:
Microfocus X-ray: Typically operates at voltages below 90 kV, offering high resolution, suitable for inspecting small components such as BGA and flip chip.
Nano-focus X-ray: Operates at higher voltages with even higher resolution, suitable for ultra-precision inspection, such as 01005 components and flip chip.
Higher power means stronger penetration, but also higher costs and energy consumption. It is recommended to select an appropriate power configuration based on the actual inspection object.
II. Image Resolution
Image resolution directly affects inspection accuracy and is one of the key indicators for evaluating X-ray equipment performance.
Common units: μm (micrometers)
Conventional resolution: 1.0–1.5 μm, suitable for most SMT inspection tasks.
High resolution: Below 1.0 μm, suitable for high-end semiconductor packaging, medical electronics, and other industries with extremely high precision requirements.
It is important to note that higher resolution is not always better. Factors such as magnification and detection speed must also be considered comprehensively. Blindly pursuing ultra-high resolution may result in reduced cost-effectiveness.
III. Magnification
Magnification determines the clarity of image details and is another key factor affecting detection accuracy.
Optical magnification: Achieved through lenses, it is cost-effective but physically limited in magnification.
Geometric magnification: Achieved by adjusting the distance between the sample and the detector, it can reach thousands of times magnification, making it the primary method in X-ray inspection.
In the SMT industry, devices with dynamic zoom functionality are recommended, as they can automatically adjust magnification based on different inspection targets, enhancing inspection efficiency and adaptability.
IV. Detector
Detectors are responsible for receiving X-ray signals and converting them into image data, directly affecting image quality and processing speed.
Main types:
1. Flat Panel Detector (FPD)
- Fast imaging speed, supports real-time imaging.
- Supports 2D/3D tomography scanning.
- Suitable for online inspection and automation integration.
2. Image Intensifier + CCD Camera
- Lower cost.
- Relatively lower resolution and contrast.
- Primarily used for offline inspection or educational purposes.
Currently, most industrial X-ray systems widely adopt flat panel detectors, particularly suited for the efficient inspection requirements of the SMT industry.
V. Software Functions and Analysis Capabilities
The software system of X-ray equipment not only affects operational convenience but also directly impacts the accuracy of defect identification and the efficiency of report generation.
1. Core functions include
Automatic Defect Identification (AXI, Automatic X-ray Inspection):
- Can automatically identify common defects such as open solder joints, bridging, insufficient solder, and misalignment.
- Supports AI algorithm optimization to enhance identification accuracy.
2. Image Processing and Enhancement Functions
Provides edge enhancement, grayscale correction, and pseudo-color display functions to facilitate manual review.
3. Data Management and Report Output
- Supports SPC (Statistical Process Control).
- Can export reports in multiple formats such as PDF and Excel.
- Supports integration with MES systems to enable data traceability and information-based management.
When selecting equipment, it is important to focus on whether the software provides open API interfaces and supports customization to accommodate future upgrades and expansion needs.
IV. Equipment Automation Level and Integration Capability
With the development of smart manufacturing, X-ray inspection equipment is also gradually moving toward automation and intelligence.
1. Automation Level Classification
- Manual Equipment: Requires manual loading and unloading, suitable for R&D or small-batch inspection.
- Semi-automatic Equipment: Supports automatic inspection with minimal manual intervention.
- Fully Automatic Equipment: Equipped with robotic arms and conveyor belts, can be seamlessly integrated into SMT production lines to achieve unmanned inspection.
2. Integration Capabilities
- Whether it supports data linkage with SPI, AOI, and pick-and-place machines.
- Whether it has interfaces with MES and ERP systems.
- Whether it supports remote monitoring and fault diagnosis.
For SMT manufacturing companies, it is recommended to prioritize fully automated X-ray equipment with production line integration capabilities, which can help improve overall production efficiency and quality management levels.
How to choose the most suitable SMT X-ray inspection machine for your needs?
In the SMT industry, X-ray inspection equipment is not only the "sharp-eyed guardian" of quality control but also a crucial tool for improving yield rates and reducing costs. However, during the selection process, it is essential to focus on the alignment between the equipment's core parameters and actual application requirements.
Within budget constraints, it is recommended to prioritize equipment with automation, intelligence, and scalability, as this not only addresses current inspection needs but also lays a solid foundation for future production line upgrades.

Company Profile
Zhejiang NeoDen Technology Co., Ltd. has been manufacturing and exporting various small pick and place machines since 2010. Taking advantage of our own rich experienced R&D, well trained production, NeoDen wins great reputation from the world wide customers.
In our global Ecosystem, we collaborate with our best partners to deliver a more closing sales service, high professional and efficient technical support.
We believe that great people and partners make NeoDen a great company and that our commitment to Innovation, Diversity and Sustainability ensures that SMT automation is accessible to every hobbyist everywhere.
