Functions Of SMT Automatic Printing Machine

1. SMT Automatic Printing Machine Substrate handling function.

Substrate handling functions include PCB substrate transfer and transportation, positioning, and support.

*Transfer transport refers to the PCB moving in and out, as well as the PCB fixed before the small back and forth movement.

*The positioning of the substrate is divided into two types of hole positioning, side positioning, and optical positioning for correction to ensure the accuracy of the position.

*The support of the substrate is to keep the printed PCB a flat plane, so that the PCB substrate does not distort during the printing process.

2. Alignment of the substrate and stencil.

Substrate and stencil alignment includes mechanical centering and optical centering, optical centering is the mechanical centering of the correction, greatly improving the printing accuracy.

3. The control function of the squeegee.

Printing machine on the squeegee control function including pressure, destroy line speed, down the depth of pressure, squeegee angle, squeegee lift.

4. The control function of the stencil.

Printing machine control of the stencil including stencil flatness adjustment, stencil and substrate spacing control, control of the separation method, automatic cleaning settings for the stencil.

NeoDen ND1 Full Automatic Visual Printer

Description

Transmission mode Section-type track

PCB clamp mode

Software adjustable pressure of the elastic side pressure

Option

1. Overall bottom suction chamber vacuum

2. Bottom multipoint partial vacuum

3. Edge lock clamping plate

Board support method Magnetic thimble, special work holding device (option: Grid-Lok)

Specification