What does the finished product look like before it is processed and shipped? Please see the following process.
1. The most upstream electronic components
We use electronic products, which are a variety of electronic components (such as: resistors, capacitors, diodes, transformers, IC), electronic products to play its function, must rely on the relevant electronic components, take our common computer, the CPU is responsible for computing, memory is responsible for storage, there are all kinds of capacitors and resistors and other small components responsible for the stable operation of the circuit.
2. PCB
With electronic components, then it is not enough, you also need a board, responsible for the operation of various components, it is the PCB, commonly known as circuit boards. Just like building a house, PCB is the framework of the house, PCB is also produced through multiple processes, including pre-design, development, production and processing
3. SMD
SMD is the front part of the electronic motherboard process, including solder paste printing, SMT machine mount, reflow oven soldering, etc., which is the three keys to the SMD process, with the rapid development of electronic products technology and precision, more and more SMD testing equipment is also diverse, such as SPI / AOI / X-RAY, etc.. SMD welding finished, a relatively standard motherboard prototype out.
4. Plug-in
Plug-in commonly known as DIP, is the need for some of the components over the hole inserted into the PCB, and then cured through wave soldering, and then glue (because some plug-in components are particularly large, the need for glue to fix, not easy to loosen or fall off), and then its too long plug-in cut corners to repair flat, and then pieces of surface repair ok after the sub-board, sub-board is completed after the functional testing phase.
5. Testing
Plug-in corner cutting sub-board, we have to test, test a motherboard function is perfect, there is no error, commonly used to test ICT, flying probe, PCBA test machine, etc..
6. Assembly, packaging
After the motherboard test, you can go to the assembly process. Assembly and packaging is the most labor-intensive, each process requires personnel to operate, some processes even need to configure more, assembly is our common assembly line, a bunch of people sitting there to complete each process into the next process, and then to the final test and packaging.
The above is the electronic product placement to the finished product process some general procedures, each process has a complete supply chain, the above is only some key processes, there are many details not stated, just to give you a general situation, so that we have a preliminary understanding of this.

