+86-571-85858685

Joint Contamination On PCB In Soldering Process

Jul 16, 2020

Joint Contamination on a Printed Circuit Board

The top of the plated through hole in Figure 1 has been contaminated during the soldering operation. The temperature has caused the coating on the resistor network to soften and has contaminated the board surface. During pre heat the top board temperature would normally be 100-110°C and may well reach over 190°C when contacting the wave. The component should not have caused this problem if normal process conditions are maintained. The component should be reassessed for process compatibility.



Figure 1: The lead-to-hole ratio here was excessive
Figure 1: The lead-to-hole ratio here was excessive.


Article and pictures from the internet, if any infringement pls firstly contact us to delete.


NeoDen provides a full SMT assembly line solutions, including SMT reflow oven, wave soldering machine, pick and place machine, solder paste printer, PCB loader, PCB unloader, chip mounter, SMT AOI machine, SMT SPI machine, SMT X-Ray machine, SMT assembly line equipment, PCB production Equipment SMT spare parts, etc any kind SMT machines you may need, please contact us for more information:


Hangzhou NeoDen Technology Co., Ltd

Web: www.neodentech.com 

Email: info@neodentech.com



Send Inquiry