pick and place machine for prototype NeoDen3V-A
NeoDen3V Advanced Introduction
NeoDen3V is an upgraded version of TM245P series.
SMT (surface mount technology) component placement systems, commonly called pick-and-place machines or P&Ps, are robotic machines which are used to place surface-mount devices (SMDs) onto a printed circuit board (PCB).
NeoDen3V--Advanced: 33x8mm, 6x12mm, 3x16mm; IC feeder; Vibration feeder
NeoDen3V--Standard: 18x8mm, 4x12mm, 1x16mm; IC feeder; Vibration feeder.
It features dual head, 42 or 24 feeder slots, vision system and flexible positioning system, which is suitable for prototyping, small-medium batch production with stable performance and affordable price.
SMT Production Line NeoDen3V-A
Single gantry with 2 heads
Tape feeder:46(all 8mm)
TQFP100 (Lead Pitch 0.5mm)
320 x 390mm
Numbers of Pumps
A. Generate coordinate file from PCB design software (AD, Eagle, KiCad,Upverter, etc)
1. Take the software Altium Designer 6.9 as an example, once set up the origin point, you can generate a csv. file directly.
2. Edit the generated coordinates file to make sure the machine could read.Copy the file into a flash drive, then import it into NeoDen3V.
This whole process only takes 3 minutes.
If you don't have PCB layout, you can also easily program a working file with the assistance of vision system
The guarantee period is 1 year from the time of purchase and lifelong service support as well as a long-term factory price supply.
NeoDen will provide online Q/A and troubleshooting support and technical advice service.