Pick And Place Machine For PCB Production Lines
pick and place machines for automatic SMT systems Introduction: NeoDen4 is a flexible pick and place machine for all types of production. With placement rates of 10,000 cph, up to 48 feeder slots, auto rails and electronic feeders, users can move from prototype into production on the same...Send InquiryChat Now
pick and place machine for PCB production lines
NeoDen4 is a flexible pick and place machine for all types of production.
With placement rates of 10,000 cph, up to 48 feeder slots, auto rails and electronic feeders, users can move from prototyping work into production on the same machine.
1. Dual vision system (up-looking and down-looking cameras), identify and calibrate the different components at one time, improves the accuracy of placement from 0201 to BGA;
2. Auto rails, help to achieve continuous placement and solve the problem of long LED bar, ex. 1.5m LED bar;
3. 19inch display monitor
Clearly check the correction details of each components,fast to solve the problem once found
4. Automatic electric feeders, reduce the feeding deviation;
5. Inside Industrial PC motherboard
32G solid state drives, read/write faster and more stable, with power-off protection function.
6. General conveyor is supported, so a SMT production line can be setup, which is more time-saving and labor-saving;
7. Four placement heads can pick up and calibrate components at one time.
8. The device supports remote system upgrade, NeoDen provides a life long system upgrade service for free to you;
Specification of PM3040
(1) Large qty of available functions
The T962A can solder most boss-eyed or double-side PCB boards of small parts, for example CHIP, SOP, PLCC, QFP, BGA etc.
(2) Ergonomic design, practical and easily operated
Good build quality but at the same time light weight and a small footprint allows the T962A to be easily bench positioned transported or stored.
(3) A large infrared soldering area
Drawer panel area: 300*320mm; this increases the usage range of this machine drastically and makes it an economical investment.
(4) Choice of different soldering cycles
Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(5) Special heat up and temperature equalization with all designs
Uses up to 1500 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
The guarantee period is 1 year(NeoDen4 has 2 years) from the time of purchase and lifelong service support.