The circuit board size of electronic products nowadays ranges from only a few tenths of a millimeter in length and breadth to the backplanes of special equipment with a small module circuit board to a side of nearly one meter, and flexible circuit boards with a thickness of only 0.2 mm to a thickness of 5 mm or more. Server board.
The minimum size of the substrate supported by the mounter is 80 mm×100 mm (length×width), the maximum size of the substrate is 330 mm×500 mm, and the thickness of the substrate is 0.5-3.0 mm. PCB board fixing method is used to clamp PCB board edges.
Mounter uses magnetic levitation high-speed linear motor, full linear drive spindle. The X and Y axis linear motors are driven by imported servo systems, and the linear encoders perform full closed loop control, showing higher speed and highest accuracy. All suction nozzle lifting shafts are driven by a straight line, with position feedback and pressure buffering.
A high-resolution, high-resolution camera is used for PCB Marks recognition and a set of components for identification and positioning. Use fast, non-stop methods to achieve high-speed flight centering during part photo recognition, including identification of PCBs, Mark points, and parts.